Tallow Products Pty Ltd

Australia's Premier Manufacturer Of Animal Fat Oil

  • Home
  • Products
  • About Us
  • ISO
  • Contact Us

LANOLIN ANHYDROUS EP ELP

Description

LANOLIN ANHYDROUS EP ELP is a pharmaceutical grade of Lanolin Anhydrous and has very low pesticide residue and practically undetectable.  It is a yellow solid.

Specifications   

Colour, GARDNER 10.0 Max
Acid Value (mg KOH/gr) 1.0 Max
Iodine Value (gr I2/100gr) 18 – 36
Melting Point, ℃ 38 – 44
Sap Value (ml/KOH/gr) 90 - 105
Water, % 0.5 Max
Ash 0.15 Max
Peroxide Value, me/kg 20.0 Max
Water absorption capacity, % 200.0 Min
Chlorides Meet EP
Water Soluble Acids/Alkalis Meet EP
Water Soluble Oxidisable Substances Meet EP
BHT, ppm 200.00 ppm Max
Paraffin, % 1.0 % Max
Pesticide Residue, ppm 1.0 Max

Packaging

LANOLIN ANHDYROUS EP ELP can be supplied in non-returnable O/Head drums containing 190 kgs net.

Storage and Handling

Hazardous Decompostion Products and Hazardous Reactions : NONE

LANOLIN ANHYDROUS(WOOL FAT) can be easily handled by conventional centrifugal pump once melted. Please store in cool place and out of direct sunlight. Store away from sources of heat and oxidising agent. Keep container close when not using the products.

March 2010: To the best of our knowledge the information contained in this this publication is correct. We cannot accept the responsibility of liability for any consequences arising from its use nor liability if the use of our products infringe any patent or other

PESTICIDE LIMITS

ppm
Chlordane 0.05
Hexachlorobenzene 0.05
Alpha-HCH 0.05
Beta-HCH 0.05
Gamma-HCH (Lindane) 0.05
Delta-HCH 0.05
Heptachlor 0.05
Heptachlor Epoxide (HCE) 0.05
Aldrin 0.05
Dieldrin 0.05
Endrin 0.05
Alpha-Endosulfan 0.05
Beta-Endosulfan 0.05
Methoxychlor 0.05
Tecnazene (TCNB) 0.05
Toxaphen 0.05
o,p-DDD 0.05
p,p-DDD 0.05
o,p-DDE 0.05
p,p-DDE 0.05
o,p-DDT 0.05
p,p-DDT 0.05
Bromophos-Ethyl 0.5
Bromophos-Methyl 0.5
Carbophenothion 0.5
Alpha-Chlorfenvinphos 0.5
Beta-Chlorfenvinphos 0.5
Chlorpyriphos-Ethyl 0.5
Chlorpyriphos-Methyl 0.5
Coumaphos 0.5
Ditalimphos 0.5
Disulfaton 0.5
Diazinon 0.5
Dichlorfenthion 0.5
Ethion 0.5
Fenchlorphos 0.5
Malathion 0.5
Isodrin 0.5
Pirimiphos-Ethyl 0.5
Pirimiphos-Methyl 0.5
Phosalon 0.5
Propetamphos 0.5
Tetrachlorvinphos 0.5
Cyfluthrin 0.5
Cis-Permethrin 0.5
Trans-Permethrin 0.5
Cypermethrin 0.5
Cyhalothrin 0.5
Deltamethrin 0.5
Fenvalerate 0.5

Maximum Permitted Total: 1.0ppm

Material Safety Data Sheet

Product Identification

Commercial Product Name: LANOLIN ANHYDROUS EP ELP

Codes :

  • UN Number: None allocated
  • Hazchem Code: None allocated
  • Dangerous Goods Class and Subrisk: None allocated
  • Poison Schedule: None allocated

Not classified as hazardous according to criteria of Worksafe Australia.

CAS Number: 8006-54-0
HS NO: 1505.0010

Health Hazard Information

Acute Effects

  • Swallowed. Practically not toxic.
  • Eye/Skin. Animal studies indicate that this type of oil or fat is neither an eye nor a skin irritant.
  • Inhaled. Fumes from over-heating maybe mild respiratory irritants.

Chronic Effects

No information available, but employee of Tallow Products Pty Ltd have not experienced any harmful effect during normal handling and production.

First Aid

  • Swallowed. Material relatively harmless. If a large amount is swallowed, seek medical advise.
  • Eye. Irrigate thoroughly with water. If irritation persists, seek Medical advise.
  • Skin. Wash with soap and plenty of water.
  • Inhaled. Remove to fresh air, seek medical attention. Choking and possibility of lung irritation from hot vapours only.

Safety Handling Information

Spills and Disposal

  • Spills. Sweep up or shovel up and recycle. Remove residue from surface with soda ash or sodium bicarbonate and hot water.
  • Disposal. Incinerate or dispose on land tip if permitted. Material is biodegrable and represents little hazard to the environment.

Fire/Explosion Hazard

  • Extinguish Media. Foam, carbon dioxide, dry powder or water spray (mist). Large fires use foam. Small fires use carbon dioxide or dry powder. Addition of water spray will aid in reducing burning rate.
  • Unusual Fire and Explosion Hazards. Vapours may cause irritation of nose and throat. In using water spray (mist), please note that product floats on water.
  • Special Fire Fighting Procedures. Protective clothing and self-contained breathing equipment should be available for firemen.

Precaution For Use

Engineering Controls

  • Ventilation. Mechanical ventilation advised to remove dusts and heated vapours.
  • Respiratory Protection. No special protection required when handled at normal ambient temperature.

Personal Protection

  • Protective Gloves. Only thermal protection.
  • Eye Protection. Chemical safety goggles or face shield.
  • Other. Suitable apron for thermal protection.

Flammability

Not flammable under condition of use.

Other Information

On the basis of available data from studies using animals and humans, it is concluded that LANOLIN is safe in present practices of use.

NB : The information on this sheet is based on our knowledge of the products at the same time of publication. Any mishandling is not the responsibility of Tallow Products Pty.

Contact Us

Tallow Products Pty Ltd

55 Pemberton St
Botany, NSW 2019
Australia

Phone : (02) 9316 9877
Fax : (02) 9316 5256

Company Profile

Tallow Products is Australia's premier manufacturer of Lanolin B.P., Lanolin Technical, refined … Read More

  • Email
  • Facebook
  • Google+
  • LinkedIn
  • Twitter

Become Wholesaler

Congratulations for finding us! We are delighted that you are interested in supplying our products to your clients. … Read More

Connect With Us

Tallow Products Pty Ltd
55 Pemberton St
Botany, NSW 2019
Australia

Phone: (02) 9316 9877
Fax: (02) 9316 5256
Email: [email protected]

Copyright © 2025 Tallow Products Pty Ltd

Disclaimer | Terms and Conditions | Privacy Policy